Home Improvement

Bathroom Upgrades: What to Do First, and What Each One Costs

Brad · · 8 min read
Bathroom Upgrades: What to Do First, and What Each One Costs

Most bathroom upgrades get done in the wrong order. People start with what they can see, like a new vanity or a nice faucet, because that’s the fun part. Then the fan that never worked peels the fresh paint, and the money goes with it.

I’ve built hundreds of kitchens and bathrooms, and I learned the trade from my dad, who learned it from his. A good upgrade plan starts with the question nobody asks: what’s failing in this room right now? Here’s the order I’d follow, what each step costs, and where an upgrade stops being an upgrade.

The Short Version

Before you buy anything
  • An upgrade keeps the plumbing where it is. Once you move a drain or open the wet walls, you're remodeling.
  • Do the order in three rounds: stop the damage, then fix what you touch every day, then change the look.
  • A fan that actually vents outside is the cheapest thing on this list that protects everything else.
  • A five-item round can land around $1,400 to $3,400. Add a new vanity and it's closer to $2,900 to $4,900.

Where an Upgrade Stops and a Remodel Starts

This is the line that decides your budget. If the toilet, sink, and tub all stay exactly where they are, and the wet walls stay closed, you’re upgrading. Your costs are mostly fixtures and a few hours of trade time.

Move a drain, even by a foot, and the picture changes. Now you’re opening the floor, and you own whatever’s under it. Our bathroom repair guide puts a full gut somewhere from $8,000 to $30,000 and up.

Upgrade Same layout. New fan, toilet, vanity in the same footprint, lighting, reglazed tub, fresh grout.
Remodel Moved plumbing, new shower pan, walls down to the studs, new floor, permits and inspections along the way.

There’s one honest catch. Some bathrooms don’t qualify for upgrades, because the room is already failing underneath. Paying for a pretty top layer on a rotten subfloor is throwing good money after bad.

Round One: Stop the Damage

Here in the Pacific Northwest, moisture and rot are the number one enemy, and I’ve opened up plenty of walls expecting a simple job and found a different job entirely. Before you spend a dollar on looks, go find the water. It takes ten minutes.

  • Push on the floor around the toilet base and the tub. It shouldn’t flex or feel soft.
  • Rock the toilet gently. A toilet that moves can mean a failed seal or a bad floor below it.
  • Press on the tile and grout inside the shower. Loose tile or missing grout means water may be getting behind it.
  • Look for black spots on the ceiling above the shower. That usually means the air isn’t leaving.

If the floor is soft, stop here and get someone out to look. Subfloor repair alone can run $500 to $2,500, and that’s the kind of work you do before anything else. If it all checks out, keep going.

The Fan Comes First

If I could only do one thing in a tired bathroom, it would be the fan. Moist air that doesn’t leave ends up in your paint, your drywall, and eventually your framing. A fan that vents into the attic isn’t solving that, it’s moving the problem upstairs.

$183 - $444
National average to install a bathroom exhaust fan, according to Thumbtack. A straight swap sits at the low end; new ductwork and wiring push it high.

The common sizing rule is 1 CFM per square foot of floor, with 50 CFM as the minimum. Add a timer switch while you’re at it, so the fan keeps running after the shower is off. Nobody remembers to go back and flip it.

Round one also includes the small stuff, and it’s cheap. Re-caulking the tub runs about $150 to $400, and regrouting about $300 to $800.

Round Two: The Things You Touch Every Day

Now you can spend on comfort. These are the upgrades you feel at 6 in the morning, long after you’ve stopped noticing the color of the walls.

Toilet

A new toilet installed runs about $400 to $900. Before you buy, measure from the wall to the center of the floor bolts. Twelve inches is standard, but older houses can have 10 or 14, and a wrong guess means a return trip to the store. A comfort height bowl is worth a look too, and if you’re planning to stay in the house long term, read our accessible bathroom guide first.

Shower Valve and Trim

Plenty of older valves have no scald protection. That’s the one where somebody flushes the toilet and the shower goes hot. Replacing a valve or cartridge usually runs about $250 to $600, more if it’s hard to reach.

Here’s the trap. New trim only fits the valve brand behind the wall, so that shiny handle set may not bolt on. Find out what you have before you order. If the valve has to come out and there’s no access from behind, you’ve crossed into retiling territory, so plan it with the tile.

Lighting and Outlets

One overhead fixture throws shadows on your face right when you’re trying to shave or put on makeup. Lights at eye level on both sides of the mirror fix that. Use fixtures rated for damp locations.

While the electrician is there, have them check that the outlets are GFCI protected. It’s a small job that matters a lot in a wet room. If you’ve got old wiring behind the wall, you want to learn that before you pick out the sconces.

Do it right even when nobody's looking. The work behind the walls matters as much as the finished surface.

Round Three: The Look

This is the part everyone wants to start with. You’ve earned it now, and it’ll last because the room underneath is sound.

Vanity

HomeAdvisor puts a new installed vanity at $300 to $3,800, with many homeowners spending around $1,500. Keep the same footprint and the plumbing stays put, which is what keeps this an upgrade. Not sure it needs replacing at all? Run the test in our bathroom cabinet makeover guide. A sound box with paint and new pulls may get you most of the way.

Tub and Tile

A dated but sound tub can often be reglazed instead of replaced. Thumbtack’s national average is $263 to $687, and a professional job typically lasts 10 to 15 years with proper care. It won’t fix a tub that flexes, rusts through, or leaks, and it’s a job for a pro with real ventilation, not a weekend kit.

If the tile is the real problem, that’s no longer a small job. Read up on bathtub walls before you decide, and compare it with a liner in our one day bath remodel breakdown.

What Bathroom Upgrades Cost, Side by Side

Here’s how the list stacks up, sorted by the order I’d do it. Local labor rates will move these numbers, so treat them as a starting point and not a quote.

UpgradeRoundOpens a wall?Typical cost
Exhaust fan1Sometimes, ceiling only$183 - $444
Re-caulk tub or shower1No$150 - $400
Regrout tile1No$300 - $800
New toilet2No$400 - $900
Shower valve or cartridge2Sometimes$250 - $600
Reglaze tub3No$263 - $687
New vanity, same footprint3No$300 - $3,800

Add it up and you get a real number to plan around. This is just arithmetic on the ranges above, so your bids will differ.

Sample Bathroom Upgrade Round
Exhaust fan$183 - $444
Regrout tile$300 - $800
New toilet$400 - $900
Shower valve or cartridge$250 - $600
Reglaze tub$263 - $687

Drop in a $1,500 vanity and you’re at about $2,900 to $4,900. That’s real money, but it’s a fraction of a gut, and you keep your bathroom through most of it. Even so, I tell people to hold back 15 to 20 percent, because old houses have opinions.

Know the Look Before You Spend

Round three is where people get stuck. They know they don’t like what they’ve got, but they can’t picture what would be better, and most contractors are builders, not designers. For years I had clients search Pinterest for rooms they liked, then showed them photos of my past work, and that only goes so far because it’s never their bathroom in the picture.

That’s why I built ReVision AI. Take a photo of your bathroom as it sits, pick a look from our design styles, and see your own room in that style. Browse the before and after gallery if you want to see what it does first.

It won’t tell you what’s under your floor, and it won’t price the job. What it will do is let you settle on a direction before you buy a vanity that fights your tile. Download ReVision AI and try 3 free transformations.

When to Call It a Remodel Instead

Sometimes upgrades are the wrong call. Paying three separate times to patch a bathroom that needed one job done right is an expensive way to end up with the same bathroom. Be honest with yourself if any of these are true:

Upgrades won't solve this

You've got a soft floor, active leaks behind tile, a layout that doesn't work, or a shower pan that's failing. Put the money toward a real bathroom remodel instead, or start with our small bathroom budget guide if money is tight.

The question I ask is simple. If this was my mom’s house, would I put a new vanity in here, or would I tell her to fix the floor first? Good, fast, or cheap, you get to pick two, but you don’t get to skip the part that’s rotting.

Your Bathroom Upgrade Checklist

  • Push on the floor, rock the toilet, and press on the shower tile to find any water damage
  • Stop and get the floor looked at if anything feels soft
  • Confirm the fan actually vents outside, then replace it or add a timer if needed
  • Re-caulk and regrout anything that's cracked or missing
  • Measure the toilet rough-in and identify your shower valve brand before ordering
  • Upgrade lighting and check that the outlets are GFCI protected
  • See your bathroom in a few styles with ReVision AI before you pick a vanity
  • Hold back 15 to 20 percent of your budget for surprises

Get Design Inspiration Weekly

Fresh room makeover ideas, renovation tips, and style guides delivered to your inbox.

Design tips and inspiration only. Unsubscribe anytime.

Related Articles