Driveway Remodel: Repair, Resurface or Replace, and What Each Costs
The Short Version
- A driveway remodel is one of three jobs: repair, resurface or full replacement. Which one you need depends on what's happening underneath, not how the top looks.
- This Old House's 2026 guide puts a 400 sq ft driveway at $2,550 to $11,600, with concrete running $5 to $21 per square foot and pavers far higher.
- Tearing out the old driveway adds roughly $1 to $4 per square foot.
- The base, the thickness and the slope decide whether a new driveway lasts 40 years or cracks in five. Ask about those before you ask about color.
The most common driveway mistake I see is picking the surface first. Somebody falls for a stamped pattern or a paver border, gets three bids on the look, and never asks where the water goes.
Then the new slab cracks along the same line the old one did. A driveway fails from the bottom up, and a remodel that only fixes the top just buys you a few years.
I’m a remodeler, not a paving contractor. But I’ve spent 20+ years on houses in places like Hawaii, Alaska and the Pacific Northwest, and the rule is the same everywhere: water and soft ground ruin whatever you put on top of them. Here’s how to think through a driveway remodel so you pay for the right fix once.
Repair, Resurface or Replace?
Start by figuring out which job you actually have. The surface damage tells you what’s going on underneath, and the answer changes the budget by thousands.
| What You See | What It Usually Means | Likely Fix |
|---|---|---|
| Hairline cracks, faded or stained surface | Normal aging, base is still solid | Clean, fill cracks, seal or resurface |
| Wider cracks in a few spots, small potholes in asphalt | Local damage, water getting in at those spots | Patch and seal, then watch it |
| Sunken sections, slabs tilting, edges crumbling | Base has washed out or settled | Replace the failed sections or the whole thing |
| Water standing on the surface or running toward the garage | Slope is wrong | Replace, because a new skin keeps the old slope |
| Cracks everywhere, like a spider web | Too thin, weak base, or both | Full replacement with a rebuilt base |
That last row matters most. Resurfacing a driveway with a failed base is like putting new tile over a rotted subfloor. It looks great for a season.
Hose down the driveway, or wait for the next rain, and walk it 20 minutes later. Puddles that don't drain, or water running at the house, tell you resurfacing won't fix the real problem.
What a Driveway Remodel Costs in 2026
The figures below come from This Old House’s driveway cost guide, updated June 2026. They’re installed prices, materials and labor, for a 400 sq ft driveway, which is roughly a 20 by 20 pad.
Those ranges are wide on purpose. Region, access, how much base work is needed and how fancy the finish gets all move the number.
Here’s the arithmetic for a plain concrete replacement on that same 400 sq ft. Tear-out at $1 to $4 per square foot is $400 to $1,600. Add the concrete range and you’re looking at roughly $2,400 to $9,900 before any surprises.
And there will be surprises. I tell every client to add 15 to 20% for what shows up once the old surface comes off. Soft spots, old tree roots, a buried pipe nobody knew about. Hidden work will get you on a driveway the same way it does behind a bathroom wall.
Where the Money Goes: Under the Surface
Most of what makes a driveway last is stuff you’ll never see again once it’s poured. That’s exactly why it gets skimped on in a cheap bid.
Concrete Network’s driveway basics lay out the standards a good concrete bid should meet:
- Thickness: 4 inches minimum. Going from 4 to 5 inches adds about 20% to the concrete cost, and thickness matters more to strength than the mix does.
- Thickened edges: the edges carry more load, so they get extra depth for 4 to 8 inches in from the edge.
- Reinforcement: wire mesh for 4 to 5 inch slabs, rebar on a grid about 12 inches apart for slabs 5 inches or thicker.
- Control joints: no more than 10 feet apart on a 4 inch slab, cut a quarter of the slab depth (1 inch on a 4 inch slab).
- Slope: at least 1/8 inch per foot away from the house, per the Portland Cement Association.
- Base: soft spots dug out and replaced with gravel or crushed rock, and 2 to 8 inches of crushed rock on expansive soils.
Control joints are the ones homeowners ask me about. They’re the straight grooves in a slab. Concrete is going to crack, so you tell it where. Skip them and it picks its own lines.
If one quote is way under the others, line them up and check thickness, base depth, reinforcement and tear-out. The cheapest bid usually leaves one of those out, and you won't find out until it cracks.
This is the same thing I’ve said about kitchens and bathrooms for years. Compare bids apples to apples. A low number that skipped the base isn’t a deal.
Water Is the Real Design Problem
I live and work in the Pacific Northwest. Rain is the number one enemy of anything built here, and driveways take it straight on.
Water that sits on a driveway, or soaks into the ground under it, softens the base. Then the slab settles, tilts and cracks. In freeze-thaw climates it’s worse, because the water expands when it freezes and pries everything apart.
So before anyone talks materials, ask three questions:
- Which way does it slope? Away from the garage and house, every time.
- Where does the water end up? The street, a drain, a gravel strip or a rain garden. Not your neighbor’s yard and not your foundation.
- Is there a low spot where it meets the garage? If water already runs into the garage, a new driveway has to fix that grade, not copy it.
Picking a Material That Fits the House
Once the base and drainage are sorted, then you get to have fun. The driveway is a big piece of what people see from the street, so it should match the house, not fight it.
A few pairings that tend to work:
- Ranch or mid-century house: clean broom-finish concrete, maybe with a contrasting border. If you’re updating a ranch, my ranch remodel post covers the rest of the exterior.
- Craftsman or farmhouse: exposed aggregate or a paver apron to soften all that gray.
- Brick house: brick or tumbled pavers pull the house and driveway together.
- Tight budget: plain concrete with good joints beats stamped concrete with a weak base, every time.
Here’s the catch. Most homeowners can’t picture any of that from a sample chip. That’s the design gap I’ve been fighting my whole career, and it’s a lot more expensive to guess wrong on 400 square feet of concrete than on a can of paint.
Permits and the Strip by the Street
The part of the driveway between the sidewalk and the street, the apron, usually sits on public right-of-way. Many cities require a permit to tear out or replace it, and some have their own rules for thickness and the curb cut.
Call your city or county before you sign anything. A good contractor will already know the answer. If they shrug, that tells you something.
If the driveway is part of a bigger exterior project, plan the two together. Our exterior remodel and 70s house exterior makeover posts walk through siding, trim and color, and the driveway should be poured after the messy work on the house is done, not before.
How to See It Before You Pour
You can’t take concrete back. So look at it first.
Stand across the street on an overcast day and get the whole front of the house, roof to curb, with the driveway in frame.
Run the photo through ReVision AI in a few styles, or use a custom prompt like "broom-finish concrete driveway with brick paver border."
Show the image to every contractor so they're all pricing the same thing. Same scope, real comparison.
You can see how other exterior photos turned out in the gallery. Curious how a new driveway would look with your house? Try it free with ReVision AI. You get three free transformations.
Your Driveway Remodel Checklist
- Do the hose test and note where water pools or runs.
- Decide if you need repair, resurfacing or full replacement based on the base, not the surface.
- Set a budget using the per-square-foot ranges above, then add 15 to 20% for surprises.
- Visualize two or three materials on a photo of your actual house before you pick one.
- Call the city about permits for the apron and curb cut.
- Get at least three bids that spell out thickness, base depth, reinforcement, joint spacing, slope and tear-out.
- Schedule the pour after any siding, roofing or other heavy exterior work is finished.
Good, fast or cheap, you can pick two. On a driveway, I’d pick good every time. You’ll be driving on it for the next 30 or 40 years.
Get Design Inspiration Weekly
Fresh room makeover ideas, renovation tips, and style guides delivered to your inbox.
Design tips and inspiration only. Unsubscribe anytime.
Related Articles
House Modification for Aging in Place: What to Change, Room by Room
A house modification plan for aging in place: ramp math, door widths, first-floor living, kitchen changes and who helps pay, room by room, from a carpenter.
9 min readGAF Virtual Remodeler: How to Use It and What It Won't Tell You
How to use the GAF Virtual Remodeler to try shingle colors on a photo of your own house, the photo tips that matter, and what to check before you buy.
7 min readGreen Remodeling: What Actually Saves Energy, Water and Waste
Green remodeling from a third-generation carpenter: keep what works, fix the walls while they're open, pick efficient fixtures, and skip the eco upsells.
8 min read